Rod Holder Rocket Launcher – Over 48″ w/ 5+ rods
Aluminum rod holder rocket launchers for installation on boat transoms, leaning posts or tool boxes and truck bed walls. Choose bare aluminum, anodized, or powder coating as well as options for number of rod holders and mounting orientation.
Rod Holders
Standard 8.5″ flared rod holders with liners. We can also use spinning rod holders. We use a 9″ spacing on the rod holders, so you can choose the length and number of rod holders that fits your application.
The rod holders are tilted aft 15 degrees. You can customize the angles if want to offset one or multiple rod holders. Just make a note in the customization field below.
The dimensions of each standard rocket launcher configuration are shown in the table. A few sample drawings are provided for reference. If you would like a specific drawing for your customization, just let us know.
Dimensions:
Rocket launchers are made from 1-1/4″ sch 40 pipe. The standard dimensions are listed in the table below. Please allow an extra 2″ on either side for the pads.
The pads are 4″ in diameter with 4x countersunk holes for 1/4″ fasteners.
Mounting Orientation
Standard rocket launchers are designed to mount on the vertical surface of your transom, leaning post, or truck toolbox.
We also build them as a deck mount to install on a flat horizontal surface. The deck mounted version can have optional cupholders.
Fasteners:
Optional fasteners can be included in your order. All fasteners are 316 Stainless Steel. Choose #14 sheet metal screws or 1/4″ machine screws (includes washer and nut). You can also choose to include a backing plate for the pad.
Finish:
We can use bare (mill finish) aluminum pipe, anodized (polished), or have it powder coated. See this link for information about aluminum coatings.
Custom Options:
We build our aluminum marine products to order, so customization is easy. If you want to adjust any dimensions or arrangements, please add your notes to the options below or get in touch with us if you have any questions.
Choose your options below:
Dimensions
Number of Rods | Width of Pipe Centers (in) | Width to Edge of Pads (in) |
2 | 19 | 23 |
3 | 28 | 32 |
4 | 37 | 41 |
5 | 46 | 50 |
6 | 55 | 59 |
7 | 64 | 68 |
8 | 73 | 77 |