ABYC and USCG require 2 hose clamps per hose connection, so purchase 4 for each length of hose.

1 per hose connection recommended,

1 per hose connection recommended,

1/4″ NPT to 3/8″ hose barb aluminum anti-siphon valve. Recommended for installations where any point of fuel feed hose may be installed below tank top.

Use this connection if you don’t need the anti-siphon valve

Required for diesel pickups and returns.

Welded in with you purchase of a fuel tank. 6″OD X 4″ID CNC machined aluminum weld-in tank clean out flange w/ viton gasket. Recommended between each baffle where the tank is accessible for inspection.

Welded in with you purchase of a fuel tank. 8″OD X 6″ID CNC machined aluminum weld-in tank clean out flange w/ viton gasket. Recommended between each baffle where the tank is accessible for inspection. This port is larger for easier cleanout/inspection.

Use these hard rubber strips to elevate and isolate the fuel tank from the faying surface during installation. Permanently bond with polyurethane based adhesives such as 5200 or Sika-Flex. Enter the total length in inches. If these are purchased with a fuel tank, we can bond them in the desired location before shipping.