Skiff Grab Bar
Aluminum skiff grab bars with optional switch panels and GPS mounts. Choose bare aluminum or powder coating.
Electronics Box:
Add a 4″x4″ electronics box to your grab bar. The bottom of the box is removable for electrical rigging and a watertight bulkhead connector is provided for the wiring to exit the side of the E-box.
Cutouts for rocker switch installation can be made for easy installation. Contact us for custom cutouts and templating for GPS installation.
Dimensions:
Skiff grab bars are made from 1″ sch 40 pipe. The standard grab bar dimensions are 12″ wide by 36″ tall measured on the pipe centers.
Fasteners:
Optional fasteners can be included in your order. All fasteners are 316 Stainless Steel. Choose self-tapping #1 screws or 1/4-20 machine screws (includes washers, nuts, and backing plate ). Grab bars are built with 4″ round mounting pads with countersunk holes in each pad.
Rod Holders and Cupholders:
Optional rod holders for the side of the grab bar. Put it in your order notes where you want these, otherwise the rod holder will go in the lower port side and cupholder on upper port side.
Forward Legs:
We can install forward legs on your grab bar. The forward legs are a nice place to strap down a cooler or small jump seat and add stability to the installation.
The single leg option will have 1 additional leg and use the same width 12″ grab bar without legs.
The double leg option will have 2 legs and the grab bar will be widened to 18″ on pipe center to accommodate a normal 40-60 qt cooler.