Shallow Water Anchor Bracket – Motor Mount
Heavy duty TIG welded aluminum brackets for guiding your shallow water anchor pin.
Shallow water anchors are a simple and inexpensive way to hold your boat in a shallow water fishing spot. Our brackets are fully customizable to accept any diameter anchor pin on the market.
Our unique brackets provide a vertical guide for the poles for easy deployment and retrieval. This is our most popular bracket and the easiest to install. Simply remove the motor mounting nuts on one side, slide the bracket on, and retighten.
Standard Dimensions:
- Mounting holes: Universal outboard pattern spacing – 8.0 inches vertically and 1.5″ laterally.
- The guide pole is tilted 10 degrees towards the transom so it sits vertically on most raked transoms. (We can customize this angle if you have a flat transom or extreme rake).
- Delrin barrel liner bushing is included on top and bottom (.80″, 1.05″, 1.38″ ID for the bushing depending on guide pipe selection).
Setback and Clearances
- From the center of the top mounting bolt, the outside of the guide pipe lands about 9″ left/right and 4″ aft. This varies some depending on guide pipe size and single or double barrel configuration.
- Customize: if you need to meet certain clearances for ladders, transducers, etc., just put that information in your order notes when you check out and we will customize a bracket for you.
Options:
- Choose port, starboard, or a matching pair.
- Regular 1″ guide pipe with .80″ bushing for 3/4″ anchors
- Large 1-1/4″guide pipe with 1.05″ bushing for 1″ anchors
- Extra large 1-1/2″ guide pipe with 1.35″ bushing for 1″ sch 40 pipe push poles and spud poles.
- Double-barrel w/ 1 closed end pipe for holstering.
- Powder coating
